Basics of The Injection Molding

One of the most common methods of shaping plastic resins is a process called injection molding.

injection molding is the process of forcing melted plastic in to a mold cavity. Once the plastic has cooled, the part can be ejected. It is useful when the parts are too complex or cost prohibitive to machine. With this process, many parts can be made at the same time, out of the same mold.

The general injection molding process almost includes some parts, that’s molding behavior of thermoplastics; molding functions – plastication & injection, forming & solidification; machine & mold operations, machine sequence; process sequence & variables – plastication, injection, packing & holding, cooling.

injection mould is accomplished by large machines called injection molding machines.
Resin is fed to the machine through the hopper. Colorants are usually fed to the machine directly after the hopper. The resins enter the injection barrel by gravity though the feed throat. Upon entrance into the barrel, the resin is heated to the appropriate melting temperature.

The resin is injected into the mold by a reciprocating screw or a ram injector. The reciprocating screw apparatus is shown above. The reciprocating screw offers the advantage of being able to inject a smaller percentage of the total shot (amount of melted resin in the barrel). The ram injector must typically inject at least 20% of the total shot while a screw injector can inject as little as 5% of the total shot. Essentially, the screw injector is better suited for producing smaller parts.

The mold is the part of the machine that receives the plastic and shapes it appropriately. The mold is cooled constantly to a temperature that allows the resin to solidify and be cool to the touch. The mold plates are held together by hydraulic or mechanical force. The clamping force is defined as the injection pressure multiplied by the total cavity projected area. Typically molds are overdesigned depending on the resin to be used. Each resin has a calculated shrinkage value associated with in.

From Website
Edited by Leafly Mould Provides Injection Mold, Die Casting Mold, Stamping Mold

Related posts:

  1. What Is an Injection Molding Machine
  2. What Is Plastic Injection Molding
  3. History of Plastic Injection Molding
  4. The Plastic Injection Molding Process
  5. Plastics Processing insert molding processes